End-of-year sale 30% off machines over $1,000 · 20% off everything else Free insured shipping worldwide Ends 31 Dec 2026 · … Pay with BTC · USDT
Shop the sale →
[email protected]
Pay with BTC · USDT — rate locked 30 min
ASICMINERSDIRECT
Track 0

Antminer S21 XP vs Whatsminer M60S: Which Should You Buy?

If you are shopping for an air-cooled Bitcoin miner, the Bitmain Antminer S21 XP and the MicroBT Whatsminer M60S are likely on your shortlist. Both are SHA-256 machines built for serious operations, both run on 220–240 V and both are supported by every major mining pool. But they sit at different points on the efficiency curve, and that difference shapes which one makes more sense for you. This comparison uses the manufacturers’ published specs.

Specs side by side

Spec Antminer S21 XP Whatsminer M60S
Manufacturer Bitmain MicroBT
Algorithm SHA-256 SHA-256
Hashrate 270 TH/s 186 TH/s
Power around 3,645 W around 3,441 W
Efficiency around 13.5 J/TH around 18.5 J/TH
Cooling Air Air
Supply 220–240 V AC 220–240 V AC

Real-world figures can vary slightly with firmware, ambient temperature and supply voltage, so use these as reference values.

Efficiency: the S21 XP’s big advantage

The headline difference is efficiency. At around 13.5 J/TH, the S21 XP uses roughly 27% less energy per terahash than the M60S at around 18.5 J/TH. Put another way, the M60S needs about 37% more electricity to produce the same amount of hashing.

Here is what that looks like for every 100 TH/s of hashrate, using the published efficiency figures:

  • S21 XP: 100 TH/s × 13.5 J/TH = 1.35 kW, or about 32.4 kWh per day
  • M60S: 100 TH/s × 18.5 J/TH = 1.85 kW, or about 44.4 kWh per day

Multiply that difference by your electricity rate and by the number of days you plan to run, and you can see why efficiency matters so much for buyers on higher power tariffs.

Density: hashrate per circuit and per rack

Both machines draw a similar amount of power, around 3.4 to 3.7 kW each. That means they occupy a similar share of your electrical capacity, but the S21 XP delivers far more hashrate for it.

On a 100 kW power budget, for example, you could run about 27 S21 XP units for roughly 7.3 PH/s, or about 29 M60S units for roughly 5.4 PH/s. If your site is limited by power rather than space, which most are, the S21 XP gets considerably more work out of the same capacity.

Upfront price vs running cost

Newer, more efficient machines usually cost more per unit and per terahash. The M60S typically sits lower on price, which can make it attractive when electricity is very cheap and capital is the bigger constraint. The S21 XP asks for more upfront but spends less on power for every terahash it produces.

The way to decide is to compare total cost over the period you expect to run the machine: purchase price, shipping and duty, plus electricity at your real rate. We do not provide profit or payback estimates, because they depend on coin price, difficulty and fees that nobody can predict. Use an independent mining calculator, enter both machines’ published specs and your power cost, and compare them under the same assumptions.

Reliability and ecosystem

Antminer S21 XP

Bitmain’s S21 family is one of the most widely deployed lines in the world. That means broad firmware support, plenty of monitoring tools and good availability of replacement fans, PSUs and control boards. Many technicians are familiar with Antminer hardware.

Whatsminer M60S

MicroBT’s Whatsminer line has a strong reputation for robust build quality and stable operation in hot climates. The M60S has a large installed base too, and MicroBT’s management software is popular with fleet operators. Spare parts are widely available.

Noise and environment

Both are loud, high-airflow machines, in the region of 75 dB and above at full speed. Neither is suitable for a living space without serious sound treatment. Plan for a garage, outbuilding, container or hosting facility with good exhaust ventilation. Our guide to noise and heat covers practical setup options.

Which should you buy?

  • Choose the Antminer S21 XP if your electricity is moderately priced or expensive, your site is power-limited, or you want a machine with the most headroom as difficulty rises.
  • Choose the Whatsminer M60S if you have very cheap power, want a lower purchase price per unit, or already run a MicroBT fleet and value consistency in tooling and spares.

Either way, make sure your circuit, PDU and cooling are ready. Check our parts and power range for PDUs, power cords and replacement PSUs.

Power, cords and setup differences

Both machines come with integrated power supplies and accept C19 power cords, so the electrical setup is very similar. Each needs its own properly rated 220–240 V circuit or a PDU outlet with enough capacity, and neither should share a circuit with other appliances. Because the S21 XP draws a little more power, check your circuit headroom carefully if you are replacing M60S units one for one.

Monitoring is straightforward with either brand. Both offer a web dashboard for pool settings, temperatures and fan speeds, and both are supported by common fleet-management tools. If you run a mixed fleet, standardising on one brand can simplify spares and staff training, but it is not essential.

Climate considerations

In very hot regions, intake temperature matters as much as the model. Both machines will reduce performance if intake air gets too hot. Good airflow, shade and exhaust separation help either miner hold its rated output.

Compare live stock

See current availability for both models and other SHA-256 machines in our SHA-256 miner collection, or browse the full shop. We accept Bitcoin and USDT, and orders ship worldwide with tracking.

Questions

Is the Antminer S21 XP more efficient than the Whatsminer M60S?

Yes. Based on published specs, the S21 XP is around 13.5 J/TH and the M60S around 18.5 J/TH, so the S21 XP uses roughly 27% less energy per terahash.

Do both miners need 220u2013240 V power?

Yes. Both are designed for 220u2013240 V AC and draw roughly 3.4 to 3.7 kW, so each needs a properly rated dedicated circuit.

Which miner pays back faster?

We do not estimate payback or profit. It depends on coin price, difficulty, fees, your electricity rate and uptime. Compare both machines in an independent calculator using the same assumptions.

Can I run either miner at home?

Both are very loud and produce a lot of heat. They are better suited to a garage, outbuilding or hosting site with proper ventilation and electrical work.