Most ASIC miners point all their work at one coin. Scrypt miners are different. Thanks to a system called merged mining, a single Scrypt ASIC can secure both Litecoin and Dogecoin at the same time, without splitting its hashrate. This guide explains how that works, introduces the main Scrypt hardware including Bitmain’s Antminer L-series, and covers what to check before you buy.
What is Scrypt?
Scrypt is the proof-of-work algorithm used by Litecoin, Dogecoin and a handful of smaller coins. It was originally designed to be memory-intensive so that it would resist specialised hardware. In practice, ASIC manufacturers solved that challenge years ago, and today Scrypt mining is dominated by dedicated machines.
Scrypt miners are measured in megahashes or gigahashes per second (MH/s or GH/s), and efficiency is expressed in joules per megahash (J/MH). You cannot compare those numbers directly with Bitcoin’s TH/s and J/TH, because a Scrypt hash is a much heavier unit of work.
How merged mining works
Merged mining lets a miner work on two compatible blockchains at once. The technical name is auxiliary proof of work (AuxPoW). Here is the simple version:
- Your miner builds a candidate block for the parent chain, Litecoin.
- The pool embeds a reference to a candidate Dogecoin block inside that Litecoin work.
- Your miner hashes as normal. Every share is checked against both networks’ difficulty targets.
- If a hash meets Dogecoin’s target, it counts as a valid Dogecoin block. If it meets Litecoin’s target, it counts for Litecoin. Occasionally it can satisfy both.
The key point is that you do not split your hashrate. The same work counts toward both chains. Dogecoin has accepted merged-mined blocks from Litecoin miners since 2014, and today most Scrypt pools pay out in both LTC and DOGE. Some pools also pay small amounts of additional auxiliary coins.
Why it matters to buyers
Merged mining means a Scrypt ASIC’s output comes from two reward streams instead of one. That does not make results predictable, because both coins’ prices and difficulties move independently, but it is why Scrypt hardware is evaluated a little differently from single-coin miners.
Scrypt ASIC models compared
The table lists well-known Scrypt models with approximate published specs. Verify the exact variant on the product page before ordering.
| Model | Hashrate | Power | Approx. efficiency |
|---|---|---|---|
| Antminer L9 | around 16 GH/s | around 3,360 W | around 0.21 J/MH |
| Antminer L7 | around 9.5 GH/s | around 3,425 W | around 0.36 J/MH |
Other manufacturers, including ElphaPex with its DG series and Goldshell with smaller home-friendly Scrypt units, also build Scrypt hardware. Specs vary by model and batch, so check each listing in our Scrypt miner collection.
Antminer L9
The L9 is Bitmain’s current flagship Scrypt ASIC. It delivers substantially more hashrate than the L7 at a similar power draw, which gives it much better efficiency. For buyers on higher electricity tariffs, that efficiency gap is the main reason to choose it.
Antminer L7
The L7 was the reference Scrypt miner for several years and remains widely deployed. It is less efficient than the L9 but is well understood, widely supported and has good parts availability. It can make sense where power is very cheap and purchase price is the main constraint.
Setting up merged mining
The good news is that you do not need special firmware. Merged mining is handled by the pool.
- Choose a pool that supports LTC and DOGE merged mining. Most large Scrypt pools do.
- Create an account or prepare wallet addresses for both Litecoin and Dogecoin, depending on how the pool pays.
- Enter the pool URL and worker name in your miner’s web dashboard.
- Set your payout addresses in the pool’s settings for each coin.
- Monitor your shares and temperatures during the first day of operation.
Practical requirements
- Power: full-size Scrypt ASICs draw over 3 kW and need a dedicated 220–240 V circuit. See our parts and power range for PDUs and cords.
- Noise: expect loud fans, typically 75 dB or more. Plan for a garage, outbuilding or hosting site.
- Heat: nearly all the electricity becomes heat, so you need strong ventilation or extraction.
- Network: a wired Ethernet connection is standard.
What about profitability?
Merged mining adds a second reward stream, but outcomes still depend on things nobody can forecast: LTC and DOGE prices, each network’s difficulty, your electricity rate, pool fees and uptime. We do not estimate earnings or returns. Use an independent mining calculator that supports merged mining, enter the published hashrate and power along with your own electricity cost, and test cautious scenarios before buying.
Scrypt vs SHA-256: what is different for buyers?
If you already know Bitcoin mining, a few things change with Scrypt. Units and efficiency figures are different, so specs cannot be compared across algorithms. The coin mix is different too: instead of a single reward stream, merged mining pays in two or more coins, each with its own price and difficulty. And the hardware market is smaller, with fewer manufacturers and fewer models in each generation. The practical rules stay the same, though: compare efficiency within the algorithm, make sure your power and cooling are ready and run your own numbers before you buy.
Finally, remember that Scrypt hardware cannot be repurposed for other algorithms, so choose with the coins you actually want to support in mind.
Browse Scrypt miners
Explore current Antminer L-series and other Scrypt machines in our Scrypt collection or the full shop. We accept Bitcoin and USDT, with your rate locked for 30 minutes at checkout.
Questions
Can one Scrypt miner mine Litecoin and Dogecoin at the same time?
Yes. Through merged mining, the same work counts toward both chains, so you do not split your hashrate. The pool handles the setup.
Do I need special firmware for merged mining?
No. Merged mining is handled at the pool level. You simply point your Scrypt ASIC at a pool that supports LTC and DOGE merged mining.
What is the difference between the Antminer L9 and L7?
The L9 has a higher published hashrate, around 16 GH/s, at a similar power draw to the L7, around 9.5 GH/s, so it is considerably more efficient per megahash.
How is Scrypt efficiency measured?
Scrypt efficiency is usually shown in joules per megahash (J/MH). Lower is better. Only compare it with other Scrypt miners.



