End-of-year sale 30% off machines over $1,000 · 20% off everything else Free insured shipping worldwide Ends 31 Dec 2026 · … Pay with BTC · USDT
Shop the sale →
[email protected]
Pay with BTC · USDT — rate locked 30 min
ASICMINERSDIRECT
Track 0

Home Bitcoin Mining with Bitaxe and NerdQaxe: What to Expect

A full-size Bitcoin ASIC is loud, hot and needs a dedicated high-power circuit. That puts it out of reach for most people who simply want to take part in Bitcoin mining at home. Small open-source miners like the Bitaxe and NerdQaxe changed that. They use real Bitcoin ASIC chips, sit quietly on a desk and run on a few watts to a few dozen watts. This guide explains what they are, how solo mining odds really work and what to expect from one in your home.

What are Bitaxe and NerdQaxe?

The Bitaxe is an open-source Bitcoin miner built around ASIC chips from Bitmain’s Antminer line. Its hardware and firmware designs are public, and a community of builders produces several versions. The NerdQaxe family follows the same idea but uses multiple chips on one board for more hashrate per device.

Approximate figures for popular versions:

Device Approx. hashrate Approx. power Power source
Bitaxe Gamma around 1.2 TH/s around 15–20 W 5 V DC adapter
NerdQaxe++ around 4.8 TH/s around 75 W 12 V DC adapter

Exact numbers depend on the version, firmware settings, cooling and ambient temperature. Check each listing in our home miners range for details.

Solo mining: the lottery explained

Most home miners are set up for solo mining. Rather than joining a pool and receiving small, regular shares of rewards, your device tries to find an entire Bitcoin block on its own. If it succeeds, you receive the whole block reward plus fees. If it does not, you receive nothing.

This is why people call it the lottery. The odds are very long, and it is important to understand exactly how long.

How to calculate your odds

Your chance of finding any given block is your hashrate divided by the total network hashrate. About 144 blocks are found per day and roughly 52,560 per year.

For illustration, assume a network hashrate of 1,000 EH/s (one zettahash). Check a block explorer for the current figure, as it changes constantly.

  • Bitaxe at 1.2 TH/s: 1.2 TH/s ÷ 1,000,000,000 TH/s = a 1 in 830 million chance per block. Over a year, that is roughly a 1 in 16,000 chance of finding a block.
  • NerdQaxe++ at 4.8 TH/s: four times the hashrate gives four times the odds, roughly 1 in 4,000 per year.

Small solo miners have occasionally found blocks, and when it happens it makes news precisely because it is so rare. You should treat a home miner as a hobby and an educational device, not as a source of income. We make no promises about rewards, and you should not buy one expecting to win.

What about pool mining?

You can point a Bitaxe at a regular pool instead. Payouts become steady but extremely small, and in most places they will not cover the electricity used. Many owners prefer solo mining because the small chance of a full block is more interesting than a tiny, predictable trickle.

Power use and running cost

Home miners use very little power compared with a full-size ASIC. Here is how to estimate the electricity cost:

  • Bitaxe at 18 W: 18 W × 24 hours = 0.432 kWh per day, or about 158 kWh per year. At $0.20 per kWh, that is roughly $32 per year.
  • NerdQaxe++ at 76 W: 76 W × 24 hours = 1.82 kWh per day, or about 666 kWh per year. At $0.20 per kWh, that is roughly $133 per year.

Swap in your own tariff to see your figure. Use the power supply that matches your device, and plug it into a normal household socket. No special wiring is required.

Noise and heat

A Bitaxe uses a small fan and heatsink. At default settings it is about as loud as a quiet desktop fan, which is fine for most home offices. A NerdQaxe has a larger fan and produces more sound and warmth, so a shelf away from your bed or desk may be more comfortable.

Heat output equals power draw. An 18 W device is barely noticeable. A 75 W device feels like a small heater close up. Give either unit open air around the heatsink and avoid enclosed cabinets.

Setting up a Bitaxe

  1. Connect power. Use the supplied adapter or one that matches the rated voltage and current.
  2. Join its Wi-Fi hotspot. On first boot the device creates its own access point.
  3. Enter your home Wi-Fi details in the setup page so the miner can join your network.
  4. Open the AxeOS dashboard from its IP address on your network.
  5. Configure your pool. For solo mining, enter a solo pool URL and your own Bitcoin address as the username.
  6. Leave the defaults alone at first. Overclocking increases heat and power. Learn how the device behaves before tuning it.

Who home miners are for

  • Bitcoiners who want to understand mining hands-on
  • Supporters of decentralisation who like adding independent hashrate
  • Tinkerers who enjoy open-source hardware and firmware
  • Anyone curious about the solo lottery who accepts the odds

If you want serious hashrate, a full-size machine from our SHA-256 collection is the next step, but be ready for the noise, heat and electrical work that come with it.

If you enjoy the hobby, many owners run several small devices together, which adds hashrate while keeping noise and power manageable.

Start mining at home

Browse Bitaxe and NerdQaxe devices in our home miners category. You can pay with Bitcoin or USDT; see the payment guide for every option.

Questions

Can a Bitaxe actually find a Bitcoin block?

Yes, it is possible, but the odds are very long. At around 1.2 TH/s against a network of roughly 1,000 EH/s, the chance is roughly 1 in 16,000 per year. Treat it as a hobby, not income.

How much electricity does a Bitaxe use?

Around 15 to 20 W, depending on version and settings. At 18 W running all day, that is about 0.43 kWh per day, or roughly 158 kWh per year.

Is a Bitaxe loud?

At default settings it is quiet, similar to a small desktop fan. NerdQaxe models have larger fans and are somewhat louder.

Do I need special wiring for a home miner?

No. Bitaxe and NerdQaxe devices use DC power adapters that plug into a normal household socket.